Lubrication And Protection Of Guideways

Jul 02, 2026

Leave a message

Guideway Lubrication
Functions of Guideway Lubricants
Enable the guideway to operate as close as possible to a state of fluid friction, thereby reducing frictional resistance, lowering drive power requirements, and improving efficiency.


Minimize guideway wear and prevent corrosion; circulating lubricating oil also serves a flushing function.


Prevent "stick-slip" phenomena under conditions of low speed and heavy load, and reduce vibration.


Dissipate frictional heat generated at high speeds and minimize thermal deformation.

 

Selection of Machine Tool Guideway Lubricants
Based on experience and data, the following factors are primarily considered when selecting machine tool guideway lubricants:
Lubricants serving as both hydraulic media and guideway oils. Depending on the specific type of machine tool guideway, a lubricant that functions as both a hydraulic medium and a guideway oil may be selected, provided it meets the requirements of both systems. For instance, with machines like coordinate boring machines, a higher viscosity (40–90 mm²/s at 50°C) is typically chosen for the guideway oil. Conversely, for various types of grinding machines, the guideway lubricant is often supplied by the hydraulic system; since the hydraulic system's requirements are stringent and must be met, a lower viscosity (20–40 mm²/s at 50°C)-matching the hydraulic system's needs-is selected.

 

Select viscosity based on sliding speed and average pressure.

Select based on practical application experience with machine tool guideways, both domestically and internationally. Existing real-world examples of guideway lubrication can serve as references during the selection process.

 

CNC machine tool guideways typically employ centralized oil supply and automatic drip lubrication systems. A common domestic example is the XHZ series centralized thin-oil lubrication unit. This unit consists of a metering lubrication pump, a precision oil filter for the supply line, a liquid level detector, a flow detector, a pressure relay, a progressive oil distributor, and an oil reservoir. It delivers oil to the guideway surfaces at scheduled intervals and in metered quantities.

 

Solid lubrication involves applying a solid lubricant to the friction surfaces of the guideway to form an adherent solid lubricating film, thereby reducing friction and wear. There is a wide variety of solid lubricants; based on their base materials, they can be classified into metals, metal compounds, inorganic substances, and organic substances. Adding solid lubricant powders to lubricating greases enhances or improves their load-bearing capacity, durability (aging performance), and performance across high and low temperatures.

 

Guideway Protection
Protecting guideways helps prevent or reduce wear on the guideway assembly, thereby extending the service life of the guideways. Protective devices are manufactured by specialized companies and can be purchased from external suppliers.


There are various methods for protecting guideways; common types of protective covers are shown in Figure 1. In CNC machine tools-particularly during machining operations at a machining center-large amounts of metal chips and coolant are generated. These can easily infiltrate the guideways, accelerating wear; large chips can even lift the machine table, compromising guideway accuracy. Consequently, telescopic steel plate covers are commonly used.

Send Inquiry