Classification Of Elevator Guide Rails

Jul 11, 2026

Leave a message

Solid guide rails are machined components produced by processing the guiding surfaces and connection points of rail profiles; they serve to guide the elevator car during operation, with smaller specifications also used for counterweight guidance. Solid guide rails come in various specifications, categorized by weight per meter (e.g., 8K, 13K, 18K, 24K, 30K, 50K) or by base flange width (e.g., T45, T50, T70, T75, T78, T82, T89, T90, T114, T127, T140).


As demands for elevator ride comfort and speed increase, the industry is shifting toward the production of high-precision guide rails. These rails improve upon standard specifications by tightening tolerances-such as reducing tolerances for guiding surface dimensions, rail height, and tongue-and-groove symmetry from 0.1 mm to 0.05 mm-while also introducing stricter requirements for end-face geometric tolerances, straightness, and twist. Designed for high-speed elevators, these rails not only require superior precision but also undergo manufacturing processes that eliminate potential causes of bending and twisting. For instance, the rail profiles undergo thorough aging treatment before the guiding surfaces are machined to reduce residual stress; a second round of aging is performed before end-face machining and final straightening to fully release internal stress, thereby minimizing post-installation deformation caused by stress.

 

Hollow counterweight guide rails are cold-rolled components formed from coiled sheet metal using a series of shaping dies; they primarily guide the counterweight during elevator operation. Hollow guide rails are classified by weight per meter (e.g., TK3, TK5) and by end-face profile-specifically straight-edge (TK5) and flanged (TK5A) designs.

Escalator guide rails are cold-rolled components primarily used to support and guide the steps of escalators and moving walkways. Every escalator manufacturer uses escalator guide rails with various cross-sectional shapes based on its own design requirements-in other words, each employs its own standards for guide rails.

Send Inquiry