Gray Cast Iron
Gray cast iron offers excellent castability, making it easy to cast into complex shapes; it exhibits high internal friction and damping, resulting in good vibration resistance; and it is inexpensive. However, using castings has drawbacks: the need to manufacture wooden patterns entails high costs and long lead times, making it cost-effective only for batch production; the casting process is prone to defects such as shrinkage cavities, gas bubbles, and sand inclusions; and castings require large machining allowances, leading to high machining costs.
Steel
Support components fabricated from steel via welding feature simple geometries and are highly adaptable to single-unit or small-batch production. Their production cycle is 30%–50% shorter than that of castings, and they require simpler manufacturing equipment and lower costs. Steel has a higher modulus of elasticity than cast iron, allowing for thinner walls under the same load and reduced weight (approximately 20%–50% lighter than cast iron), which raises the natural frequency. However, steel has poorer damping properties than cast iron, necessitating structural vibration-damping measures; it requires a significant amount of manual benchwork; and costs are higher for batch production.
Other Materials
In recent years, natural rock has been widely adopted as a base material for various high-precision mechatronic systems. For instance, high-precision granite is used for components such as the worktables of coordinate measuring machines (CMMs) and the beds of diamond turning lathes. Ceramic materials are also beginning to appear internationally for use in support components. Natural rock and ceramics offer numerous advantages: after long-term natural aging, residual stress is minimal, internal structure is stable, and dimensional accuracy is well-maintained; the damping coefficient is approximately 15 times that of steel, ensuring good vibration resistance; wear resistance is 5 to 10 times higher than that of cast iron; and the low thermal expansion coefficient ensures good thermal stability. Their primary disadvantages include high brittleness and poor impact resistance, as well as a tendency for oil and water to penetrate the crystalline structure, causing deformation.
