Drawer Slide Issues And Solutions

Jul 18, 2026

Leave a message

If a drawer is difficult to pull, stiff, or does not slide smoothly, it indicates insufficient installation clearance; the furniture manufacturer should be asked to increase the clearance by 1–2 mm to resolve this. Also, check that the mounting screws are the correct size.

 

If the drawer slides come off the track, it indicates excessive installation clearance; the furniture manufacturer should be asked to reduce the installation dimensions slightly.

 

If the drawer is uneven (not level), first check that the mounting hole positions on both sides are aligned, then verify that the drawer front is square (at a 90-degree angle).

 

If two drawers use the same installation dimensions for the slides but are not interchangeable, it indicates inconsistent positioning of the drawer fronts.

 

If the drawer front is off-center (leaning to one side), it indicates that the installation dimension on the right side was not calculated according to the standard 12.5 mm.

 

If the drawer front hits the cabinet panel or the bottom panel, it indicates that the mounting holes were not drilled according to the standard slide dimensions.

news-800-800

Send Inquiry