Miniature CNC Linear Guide Rail

Miniature CNC Linear Guide Rail
Details:
The Miniature CNC Linear Guide Rail is designed for machine axes with limited internal space, lightweight moving assemblies, and precise linear movement requirements.

Common Rail Sizes: 9, 12, and 15 mm
Basic Dynamic Load Rating C: Approx. 1.62–4.17 kN
Basic Static Load Rating C₀: Approx. 3.08–6.96 kN
Send Inquiry
Description
Send Inquiry
product-800-800

Reduced Moving Mass for Compact CNC Equipment

 

The Miniature CNC Linear Guide Rail is designed for machine axes with limited internal space, lightweight moving assemblies, and precise linear movement requirements.


Common rail sizes are 9 mm, 12 mm, and 15 mm. The basic dynamic load rating is approximately 1.62–4.17 kN, while the basic static load rating is approximately 3.08–6.96 kN.


Narrow, standard, long, and wide structures are available. These options allow the guide system to be matched with compact spindles, tool-adjustment mechanisms, inspection platforms, and miniature machining equipment.


The small rail and block dimensions reduce moving-platform weight. This can lower the load on a stepper motor or servo system and improve acceleration and deceleration performance in short-travel CNC axes.

 

 Smooth Response during Fine Feed and Direction Changes

 

Precision raceways and a recirculating ball structure provide relatively low movement resistance. This supports slow fine feeding, high-speed short travel, and frequent direction changes.


The guide system can carry radial, reverse-radial, and lateral loads. It is therefore suitable for compact machine structures where the mounting direction is restricted.


A wide block increases the supporting span and can improve resistance to rolling moments. A long block provides a larger effective load-bearing area. The correct structure should be selected according to the moving-part weight, mounting-hole positions, load center, and moment requirements.


Selecting an oversized rail may unnecessarily increase motion inertia. Selecting a rail that is too small may leave insufficient load or rigidity capacity. The machine layout and working load should therefore be reviewed together.

 

 Stainless Steel Options and Equipment Uses

 

Some Miniature CNC Linear Guide Rail configurations can use stainless steel rails, blocks, and rolling elements. This can improve suitability for clean, slightly humid, or frequently cleaned environments.


The product can be used in small CNC engraving machines, miniature milling and drilling equipment, PCB processing machines, precision tool-adjustment mechanisms, small laser-processing platforms, electronic component manufacturing equipment, optical inspection platforms, desktop CNC machines, and medical or laboratory automation devices.


Zhejiang Jiarun Hardware Co., Ltd. can review rail size, block structure, installation direction, protection, and lubrication according to equipment drawings. For desktop machines and multi-axis compact platforms, the technical team can also assist with combining different models before sample testing.

 

 Custom Development and Packaging Control

 

The development period for a non-standard product is evaluated according to its structure and is normally referenced at 45–60 days. Repeat orders can often omit part of the early confirmation process, but the actual delivery time still depends on the production process and workshop schedule.


Samples can be supplied before volume production. The minimum order quantity and mixed-model purchasing arrangement are discussed according to the project stage.


Quality control includes in-process inspection and a full inspection before packaging. Third-party inspection can also be arranged. Precision rails and blocks are packed separately with rust protection and cushioning materials to prevent contact between raceways, blocks, and mounting surfaces during transportation.

 

 Product Specifications

 

Parameter

Specification

Common Rail Sizes

9, 12, and 15 mm

Basic Dynamic Load Rating C

Approx. 1.62–4.17 kN

Basic Static Load Rating C₀

Approx. 3.08–6.96 kN

Load Directions

Radial, reverse-radial, and lateral

Structural Options

Narrow, standard, long, and wide

Hot Tags: miniature CNC linear guide rail, China miniature CNC linear guide rail manufacturers, suppliers, factory, CNC Flange Linear Guide Block, cnc linear rails, CNC Roller Linear Guide Rail, Heavy Duty CNC Linear Guide Rail, Miniature CNC Linear Guide Rail, Precision CNC Linear Guide Rail

Send Inquiry